What We Fix
- Surface burners that will not light, or click constantly after lighting.
- Weak or yellow flames, and burners that will not simmer low.
- Ovens that will not reach temperature or bake unevenly.
- Failed bake, broil and convection elements on dual-fuel ranges.
- Igniters, spark modules and gas valves.
- Control faults, error codes and doors that will not lock for self-clean.
Common Problems and Typical Causes
| Symptom | Typical Cause | What We Do |
|---|---|---|
| Burner clicks, no flame | Wet or misaligned cap, fouled igniter, valve | Clean and align the burner, test the spark and valve |
| Oven won't reach temp | Weak element, igniter or temperature sensor | Measure cavity temperature and test heating parts |
| Uneven baking | Convection fan or sensor drift | Verify fan operation and calibrate the sensor |
| Burner won't simmer | Valve or burner orifice fault | Service the valve and clear the orifice |
| Error on the display | Control board or relay fault | Read the code and repair the affected circuit |
Gas Safety First
If you smell gas, do not operate any switch. Leave the home and call your gas utility or 911 from outside. Once the area is safe, we can service the range. See our emergency repair page for urgent situations.
Brands We Service
We repair ranges from Wolf, Viking, Thermador, La Cornue, Dacor, Monogram and Jenn-Air.
Burner or Oven Down?
Book a diagnostic visit. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
Frequently Asked Questions
Why Does My Wolf Burner Click but Not Light?
Continuous clicking with no flame usually means the spark igniter is firing but gas is not reaching or lighting at the burner. A wet or misaligned burner cap, a fouled igniter, or a gas valve fault are the common causes.
Why Does My Oven Heat Unevenly?
Uneven baking usually points to a weak bake or convection element, a failing temperature sensor, or a fan that has slowed. We measure actual cavity temperature against the setting to confirm.
Is It Safe to Keep Using a Range with a Burner That Won't Shut Off?
No. A burner or valve that will not shut off cleanly is a safety issue. Turn off the range at the gas shutoff if you can and book service; do not keep using it.
Related
Burner Not Igniting
Spark, gas and burner-cap causes across brands.
Wall Oven Repair
Element, sensor and lockout faults on wall ovens.
Wolf Igniter Clicking
Why the spark keeps firing after the burner lights.